UEECD0007
Apply work health and safety regulations, codes and practices in the workplace.
Energy Training Group is raising the bar of training in the solar energy sector and electrotechnology industry. Be taught by leading experts and gain in-demand skills and knowledge for a future in the advancing renewable energy industry.
Enrol and start learning with us today!
[elementor-template id=”7669″]
[elementor-template id=”7678″]
DESIGN ONLY
Did you Know non-electricians can now become accredited solar & battery designers in Australia?
DESIGN ONLY
Did you Know non-electricians can now become accredited solar & battery designers in Australia?
$1895
($1500 payable on enrolment and remaining fee to be paid at time of practical course dates.)
Online Self-paced & 1 Day Classroom Course, START IMMEDIATELY
UEE20120
The installation, commissioning and de-commissioning of single head, split air conditioning and heat pumps systems to a prescribed routine where the maximum plant capacity for each system does not exceed 18 kW.
This qualification excludes competencies required for service, repair, maintenance, diagnostic/fault finding and electrical work or the safe and proper installation of commercial refrigeration, air conditioning and heat pump plant and equipment.
This course teaches you to assemble and position, start up single-head split air-conditioning units and systems to a prescribed routine. This includes wall hung, floor and ceiling suspended Split systems and water heating heat pumps.
Once successfully completed, you can apply for your refrigerant handling licence through Arctick.
To be eligible to undertake the course you must currently hold an Australian Unrestricted Electrical Licence.
Content Delivery
Theory Assessment (Online, Self-Paced), Practical Assessments (1 day Face to Face), On the Job Supervisor sign off of installations. One installation sign-off is completed during the course, and another must be completed onsite by a Refrigeration Mechanic.
Theory completed online self-paced
Practical: 1 day practical at an Energy Training Group Training Centre
Training Outcome
Successful completion of this course will result in the award of a Statement of Attainment in the current version of the following Units of Competency.
Energy Training Group is a Nationally Recognised Training Organisation, and students who successfully complete this course will be issued a Statement of Attainment for the units of competency UEE20120.
Apply work health and safety regulations, codes and practices in the workplace.
Participate in development and follow a personal competency development plan.
Fabricate, assemble and dismantle utilities industry components.
Fix and secure electrotechnology.
Use drawings, diagrams, schedules, standards, codes and specifications.
Document and apply measures to control WHS risks associated with electrotechnology work.
Prepare and connect refrigerant tubing and fitting.
Recover, pressure test, evacuate, charge and leak test refrigerants – split systems.
Install and start up single head split air conditioning and water heating pump systems.
Apply environmentally sustainable procedures in the energy sector.
Maintain documentation.
To take this course, you must be at least one of the following:
– A licensed electrician holding a current electrical work licence.
– A qualified plumber or gas fitter interested in recognition of prior learning (RPL).
– A 3rd or 4th electrical apprentice who has successfully completed the units of competency outlined in the first years of an electrotechnology apprenticeship and has at least two years of industry experience.
– For non-electrical workers – recognition of prior learning (RPL) is offered if you have a trade qualification in plumbing/gas fitting.
This course involves simulated workplace practical training additional to the online theory components.
1-day practical component held at an Energy Training Group training facility.
On completion of the split system air conditioning course at one of our delivery locations, you may undertake further studies to gain additional qualifications.
For more information, please reach out to Energy Training Group for to learn more about your available options.
An unrestricted electrical licence issued by an Australian state or territory is a prerequisite for enrolment in this course.
Electrical apprentices may enrol in this course, however they will need to wait until they are issued their unrestricted licence before being awarded a Statement of Attainment OR show they have completed the prerequisite Units of Competency or equivalents in their studies already:
One of:
UEEEL0039 Design, install and verify compliance and functionality of general electrical installations
UEERE0051 Apply electrical principles to renewable energy design
UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories
Online/Onsite component: Online/onsite component: The time to complete the online component will differ between students, but students should expect to commit around 40 hours
Courses are valid for twelve (12) months. Extension fees apply from the date of expiry, and the maximum extension permitted is six (6) months from the date of expiry.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase from the SAI Global website or Techstreet website, and also available from some libraries, institutions and industry associations:
Students enrolled in the course must ensure that they have:
In accordance with the Australian Quality Framework, Energy Training Group is fully committed to ensuring quality education for all students. We make sure the course process is:
Energy Training Group can engage in a recognition of prior learning evaluation on request of the candidate. Our organisation does not offer entry-level VET sector training.
To take this course, you must be at least one of the following:
– A licensed electrician holding a current electrical work licence.
– A qualified plumber or gas fitter interested in recognition of prior learning (RPL).
– A 3rd or 4th electrical apprentice who has successfully completed the units of competency outlined in the first years of an electrotechnology apprenticeship and has at least two years of industry experience.
– For non-electrical workers – recognition of prior learning (RPL) is offered if you have a trade qualification in plumbing/gas fitting.
This course involves simulated workplace practical training additional to the online theory components.
1-day practical component held at an Energy Training Group training facility.
Career & Study Opportunities
On completion of the split system air conditioning course at one of our delivery locations, you may undertake further studies to gain additional qualifications.
For more information, please reach out to Energy Training Group for to learn more about your available options.
Energy Training Group courses lead to Solar Accreditation Australia
Energy Training Group is an approved provider of Nationally Recognised Training
Copyright © 2026 Energy Training Group is Proudly Crafted by 